SMD Manufacturer e fana ka ka ho otloloha unibody e kholo ea hona joale inductance Featured Image

SMD Manufacturer e fana ka inductance e kholo ea hona joale ka kotloloho

NOMORO ea mohlala: MS0640-2R2M

Li-inductors tsa rona tse kopaneng li etselitsoe ho boloka le ho lokolla matla lipotolohong tsa elektroniki.Ka ho kopanya inductor ka kotloloho ho substrate kapa chip, re felisa tlhoko ea li-inductors tse ngata tsa kantle, ho fokotsa haholo boholo ba sistimi ka kakaretso.Mokhoa ona oa compact form o bula monyetla oa lisebelisoa tse nyane, tse nkehang habonolo ntle le ho senya ts'ebetso.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Melemo

1) Moralo o ikhethileng oa inductor ea rona e kopaneng le ona o ntlafatsa ts'ebetso ea ona.Ka tšebeliso ea eona e tlase ea matla, e nolofalletsa litsamaiso tsa elektroniki ho sebetsa ka tšebeliso e fokolang ea matla, ka hona, ho lelefatsa bophelo ba betri le ho fokotsa litšenyehelo tsa motlakase.Bokhoni bona bo bohlokoa lefatšeng la kajeno le amehileng ka matla kaha bo thusa lisebelisoa tse tšoarellang nako e telele, tse baballang tikoloho.

2) li-inductors tsa rona tse kopaneng li fana ka ts'ebetso e phahameng ho feta mefuta e mengata ea maqhubu.Ebang e sebelisoa lits'ebetsong tsa maqhubu a phahameng joalo ka phetisetso ea motlakase e se nang mohala, kapa lits'ebetsong tse fokolang joalo ka li-audio amplifiers, li-inductors tsa rona tse kopaneng li fana ka litekanyetso tse tsitsitseng le tse tšepahalang tsa inductance, tse netefatsang ts'ebetso e ntle haholo le botšepehi ba matšoao.

3) Ho tšoarella hape ke karolo ea bohlokoa ea li-inductors tsa rona tse kopaneng.Li-inductors tsa rona li etselitsoe ho sebelisa lisebelisoa tsa boleng bo holimo le lits'ebetso tsa tlhahiso ho mamella maemo a thata a ts'ebetso le maemo a thata.Ho tšoarella hona ho tiisa bophelo bo bolelele ba sehlahisoa, ho fa bareki khotso ea kelello le kholiseho ho tharollo eo ba e khethileng.

4) thepa ea bona ea tekheniki, li-inductors tsa rona tse kopaneng li bonolo ho li kenyelletsa lits'ebetsong tse fapaneng tsa elektroniki.Ho lumellana ha eona le mekhoa e tloaelehileng ea tlhahiso ho lumella ho kopanngoa ka mokhoa o se nang moeli ho mefuta e fapaneng ea lipotoloho tsa elektroniki le meralo.Boiketlo bona ba ho kopanya bo fokotsa haholo nako ea tsoelo-pele le litšenyehelo, ho etsa hore e be tharollo e khahlehang bakeng sa baetsi ba lisebelisoa tsa elektronike.

LITŠOANTŠISO

(1).Lintlha tsohle tsa liteko li thehiloe ho 25℃ ambient.

(2).DC current(A) e tla etsa hore ho be le hoo e ka bang △T40℃

(3).DC current(A) e tla etsa hore L0 e theohe hoo e ka bang 30%Typ

(4).Mocheso oa ho sebetsa: -55 ℃ ~ + 125 ℃

(5) .Mocheso oa karolo (ambient + temp rise) ha ea lokela ho feta 125 ℃ tlas'a ts'ebetso e mpe ka ho fetisisa.

maemo.moralo oa potoloho, karolo.PWB mohlala oa boholo le botenya, phallo ea moea le pholiso e 'ngoe

tokisetso tsohle ama karolo mocheso.Karolo ea mocheso e lokela ho netefatsoa ts'ebetsong ea den

(6)kopo e khethehileng :(1)Ho ngola 2R2 ka holim'a' mele

tlhaloso

Kopo

(1) Boemo bo tlase, lisebelisoa tsa motlakase tse phahameng.

(2) Lisebelisoa tse tsamaisoang ke betri.

(3) Li-converter tsa DC / DC litsamaisong tsa motlakase tse ajoang.

(5) Li-converter tsa DC / DC bakeng sa mefuta e mengata ea liheke tse ka etsoang tšimong.

LBH

Q1.Re ka fumana mehlala joang ho uena?
A1. Haeba u hloka tlhahlobo ea mohlala pele, lisampole lia fumaneha.Ka tloaelo re nka matsatsi a 2 ho hlophisa lisampole.Haeba re se na rekoto ea khoebo le uena pele, re hloka ho lefisa disampole tsa disampole le thepa ya poso.

Q2.Na u hlahloba kapa u sheba thepa eohle ea hau pele u pepa?
A2: E, re na le teko ea 100% mme re hlahloba thepa eohle pele re pepa.

Q3.Re ka fumana thepa joang ho uena?
A3: Re ka fana ka lisebelisoa tsa rona tsa lipalangoang le theko bakeng sa referense ea hau, 'me mokhoa oa ho qetela oa lipalangoang o ho uena tlasa maemo a rona a hajoale.

Q4.Lipehelo tsa hau tsa tefo ke life?/O tla nthomella neng likarolo?
A4: Tefo e feletseng.Thepa e ne e tla romelloa matsatsing a mosebetsi a 3-5 ka mor'a hore tefo e amoheloe, qetellong e itšetlehile ka bongata.

Q5.Ho thoe'ng ka puseletso le phetoho?
1. Re ananela khoebo ea hau mme re fana ka leano la ho khutla la matsatsi a 7 hang hang.(Matsatsi a 7 ka mor'a ho amohela lintho).
2. Haeba ho na le mathata leha e le afe a boleng, ka kopo etsa bonnete ba hore lintho tsena kaofela li tlameha ho khutlisetsoa boemong ba tsona ba pele hore li tšoanelehe ho khutlisetsoa chelete kapa ho nkeloa sebaka.(Lintho life kapa life tse sebelisitsoeng kapa tse senyehileng li ke ke tsa khutlisoa kapa tsa nkeloa sebaka)
3. Haeba lintho li na le phoso, ka kopo re tsebise matsatsing a 3 ka mor'a ho pepa.

E fetileng: Li-inductors tse kopantsoeng tsa SMT/SMD Li-coils & Chokes MHCC MHCI Fixed Inductors

E 'ngoe: Li-inductors tse kopantsoeng tsa SMT/SMD Li-coils & Chokes MHCC MHCI Fixed Inductors

Ngola molaetsa wa hao mona mme o re romele wona